[期刊论文] 邵敏强,陈卫东,陈前,基于输入估计方法的振动主动控制试验研究,振动与冲击, 2013, 32(3): 172-177

发布者:孙加亮发布时间:2020-08-27浏览次数:393

基于输入估计方法的振动主动控制试验研究

邵敏强,陈卫东,陈前

 

摘要:针对基于随机游走和输入估计策略的振动主动控制方法进行试验研究。该方法涉及的动力学模型既依赖于受控系统的基本物理参数,又与未知的外扰激励密切相关。采用模态识别方法离线辨识系统的物理参数,以获得系统状态方程;再利用随机游走模型将未知外扰视为辅助状态量构造新的状态方程,并借助Kalman滤波原理对新状态方程中未知状态进行估计,得到未知状态和外扰估计值。根据系统已知的测量输出、未知状态及外扰的估计值构造目标函数,应用LQG方法求解控制器增益,得到考虑未知外扰的最优控制输入。以柔性悬臂梁模型作为受控对象,对其实施振动主动控制,试验结果表明,该控制方法能有效抑制模型的前四阶模态振动,尤其对低阶模态控制,其效果远优于经典LQG控制方法。

关键词:振动主动控制;最优控制;输入估计;KALMAN滤波;未知外扰

Test for an active vibration control method based on input estimation

Minqiang Shao, Weidong Chen, Qian Chen

 

AbstractThe aim of this study was to investigate a method of active vibration control based on input estimation with a test method. The control method depended on parameters and external disturbance of a controlled system. In order to establish a dynamic equation of the system with unknown parameters, an algorithm of model identification was introduced to identify the parameters firstly. And then, the system disturbance was described as a discrete recursive expression with the random walk model and used to construct a new state equation as an auxiliary state variable. According to the methods of Kalman filtering and linear quadratic Gaussian  LQG, the control algorithm based on the new state equation was built. Therefore, the system objective function was created according to the new state vectors including disturbance, state variables and control inputs. Finally, the values of the current control input could be obtained with the optimal algorithm. The method was validated in an example of a cantilever beam model. The results revealed that the proposed method is better than the conventional LQG method.

Keywordactive vibration control; optimal control; input estimation; Kalman filtering; unknown disturbance

 

原文链接:http://jvs.sjtu.edu.cn/CN/Y2013/V32/I3/172